Car Panoramic Sunroof New Universal Automotive Parts Romantic Sunroof Fiber Optic Starry Sky Ceiling Colorful +Meteor

Package included:
1x 6w light engine （no twinkle effect）
1x RF controller ( NOT included Battery of Remote : CR2025 3V button battery )
1 x Car cigarette plug 
1 x Connectors
1 x Fiber optic
Drill bits

Features
*Optic fiber light is a night lighting ideal light source, by using the theory of total reflection,
light transmission through optical fiber to people need light anywhere for lighting.
*Optical fiber safety, itself is not charged, not afraid of water, can suite many environment.
*Optical fiber small size, soft and flexible, easy to create and make whatever you want shape.
*Optical fiber long life, low maintenance workload.
*Starry sky lights decorate the ceiling, which can be widely used in cars, home theaters, children's rooms, etc.

Package 1

• 0.75 = 270 fibers

• 1.0 = 20 fibers + 200 fibers

• 1.5 = 10 fibers

• 3m per fiber

• 16W single-head + meteor integrated machine

• 300 starry points + 200 meteor points (Suitable for small cars with sunroof / SUVs with panoramic sunroof)
  

Package 2

• 0.75 = 320 fibers

• 1.0 = 50 fibers + 200 fibers

• 1.5 = 10 fibers

• 3m per fiber

• 16W single-head + meteor integrated machine

• 380 starry points + 200 meteor points (Suitable for SUVs with small sunroof)

Package 3

• 0.75 = 380 fibers

• 1.0 = 50 fibers + 200 fibers

• 1.5 = 20 fibers

• 3m per fiber

• 16W single-head + meteor integrated machine

• 450 starry points + 200 meteor points (Suitable for business vans)

INSTALLATION TUTORIAL

1.Remove the car roof
Remove the roof of the car first(Overturn Copilot or seat,remove it from the back door)
2. Drill holes
 you can use the pen to draw  the point ,then use a 0.5mm-1.5mm twist drill bit to drill holes.
lf you want to make complex patterns, such as stars,  galaxies, etc., you can paste a pattern on the back of the ceiling then Punch holes according to the pattern  . Simple patterns can be directly Just draw holes in the ceiling.
3. Insert fiber
4. Fixed fiber
Use hot melt glue or kafuter K-5905 glue to fix.
5. Straighten the fiber
Straighten the optical fiber lines(ens of small bundles), and the concentrated parts can be rolled with black electric tape so tha tthey will not be scattered.
6. Stick sponge or leather
Stick sponge or leather to isolate the iron sheet to extend the life of the optical fiber.
7. Cut the fiber
Cut off the excess fibers in thecar, usually cut it flat to the roof.You can also cut the fiber after installing the roof.
8. Electrical connection 
The power supply can be connected to the cigarette lighter plug，low beam, driving light, ACC, and the required power supply voltage is 12V. The LED light source can be hidden in the C-pillar or the trunk. Finally, Put the car roof back on .